Fitted with 2 fixing points, the PWB Anchor SBBE Series Clamp provides the flexibility to select the optimum attaching point for every operation, replacing the need for both vertical and horizontal plate clamps. The swivel jaw is spring loaded to ensure that the clamp remains locked in position.

Capacity	Part No	Model	Jaw Opening	Weight
(tonnes)			(mm)	(kg)
2	43313	SBBE-2	0–40	3.7

Similar to the SBBE Series model, the SBBA Series Clamp is additionally fitted with non-marring jaws and has been specially modified to meet the requirements of handling hardened steel plate.

Capacity	Part No	Model	Jaw Opening	Weight
(tonnes)			(mm)	(kg)
1	49600	SBBA-1	0–40	3.7
2	49601	SBBA-2	0–40	7.6
3	49602	SBBA-3	5–35	7.8

A vertical plate clamp suitable for general purpose applications, the Anchor VPC is safe, cost effective and offers efficient performance to meet most workshop requirements. Should not be used on plates exceeding 400HV.

Capacity	Part No	Model	Jaw Opening	Weight
(tonnes)			(mm)	(kg)
1	49311	1t Anchor VPC	0–20	3.9
2	49667	2t Anchor VPC	0–30	6.6
3	49668	3t Anchor VPC	0–35	9.0

Fitted with a spring-loaded safety lock for secure holding, even when the plate is lowered to the ground, E Series Plate Clamps are ideally suited for lifting a plate from the horizontal to the vertical plane. Standard features include a spring type clamping mechanism with a safety factor 5 times the rated capacity, or better.

Capacity	Part No	Model	Jaw Opening	Weight
(tonnes)			(mm)	(kg)
1	43283	E1	0–20	3.7
1	43284	E1	0–30	4.7
2	43286	E2	0–30	6.6
3	43287	E3	0–35	9.0
5	43290	E5	5–45	16.8

Non-marking NEE Series Clamps use a flat faced wedge cam to grip material, preventing any marking of the surface. In the event of the load slipping, the in-built toothed cam will automatically hold the load securely in position.

Capacity	Part No	Model	Jaw Opening	Weight
(tonnes)			(mm)	(kg)
1	43296	NEE-1	0–20	6.0
2	43297	NEE-2	5–25	9.0

Designed specifically to lift plate in the horizontal position, PWB Anchor HPC Series Clamps are generally used in pairs, with 4 clamps and spreader beams recommended for long or flexible sheets. Test certificates and safety instructions are available on request. Ideal for use with Herc-Alloy slings.

Capacity	Part No	Model	Jaw Opening	Weight
(tonnes)			(mm)	(kg)
1.5t/pair	49669	HPC-1	0–50	4.0
3t/pair	49670	HPC-2	0–50	7.5
5t/pair	49671	HPC-3	0–50	11.0

This comprehensive range provides the safest approved method of suspending loads in a fixed position, or for use as a device for lifting beams. Featuring a single threaded adjustment pin for simple and easy ‘one handed’ installation, PWB Anchor Girder Clamps are supplied in a durable electrostatic enamel finish for capacities ranging from 1 to 10 tonnes, with varying girder widths.

Capacity	Part No	Bream Range	Headroom		Suspension	Weight
(tonnes)		(mm)	(min/mm)	(max/mm)	(pin dia. mm)	(kg)
1	48246	75–220	78	135	20.3	4.8
2	48247	75–220	78	135	20.3	5.5
3	48248	100–250	100	160	22.1	11.8
5	48249	125–270	119	159	40.0	16.0
10	48476	130–320	150	205	53.0	31.0

Headroom is maximum for narrowest beam width and decreases as beam width is increased.